A burst pipe is an emergency, but the first ten minutes decide most of the damage. Shut off the main water valve, cut power to wet areas if it is safe to do so, document everything, and call a licensed plumber. If the break is in your underground sewer or drain line rather than a supply line inside the walls, the repair is different, and often does not require tearing up your yard.
This guide covers both situations. You will find the emergency steps, realistic costs, how long repairs take, how to handle insurance, and how to tell a burst supply pipe from a collapsed sewer lateral. We repair the second kind, so we will be clear about where our work starts and stops.
TL;DR
- Shut off the main water valve first. Then document the damage and call your insurer and a licensed plumber.
- Expect roughly $200 to $3,000 for most burst pipe repairs, with a national average near $500, and more for underground or complex jobs.
- Supply line or sewer line? Water spraying or pooling from a pressurized pipe is a plumber’s job. Sewage backups, sinkholes and soggy lawn strips point to a damaged sewer lateral.
- Broken sewer lines can often be fixed without excavation using cured-in-place pipe (CIPP) lining, typically $3,500–$8,000 with us.
- Pipe failures cluster around temperature swings, so late fall is the time to prepare, not January.
Table of Contents
- Step one: stop the water
- Why pipes burst in the first place
- What burst pipe repair costs
- How long does a burst pipe repair take?
- Is it a supply line or a sewer line?
- When the burst pipe is underground
- Trenchless repair costs in Maine
- Our perspective: what we see after the water stops
- Insurance: what to say and what to save
- Preventing the next burst
- Need a sewer line looked at?
- FAQ
- Sources
Step one: stop the water
When a pipe bursts, close the main shut-off valve immediately. Seattle Public Utilities notes that the valve is usually in a basement, crawlspace or garage, and sometimes outdoors. In many homes it sits near the water heater.
If you cannot find or turn the valve, call your water utility. They can often send a crew to shut the water off at the meter.
Here is the order that limits damage, based on guidance from Massachusetts state officials on water damage response:
- Turn off the main water supply. If it is safe, also close the cold-water inlet to the water heater.
- Move porous items out of the water’s path. Electronics, rugs and cardboard go first.
- Photograph and video the damage before you clean anything up.
- Call your insurance company to start a claim, and keep every receipt for emergency mitigation such as standing water removal.
- Keep people away from wet areas until professionals arrive.
If water is near outlets, appliances or a panel, do not step into it. Call an electrician or your utility before touching anything electrical. A more detailed burst pipe emergency checklist can help you walk through the first hour if you want a second reference.
Temporary fixes, and their limits
If you cannot get a plumber right away, pipe clamps, epoxy putty and rubber repair tape can slow a leak on an accessible, depressurized pipe. Treat them as a bridge of hours, not a repair. A burst pipe is already failed material, and the neighboring sections are usually stressed too. Have a professional inspect before you close the wall back up.
Why pipes burst in the first place
Freezing is the famous cause, but not the only one. Corrosion, aging materials, high water pressure, ground movement and tree roots all play a part. Temperature swings matter more than most homeowners think. The NYC Department of Environmental Protection points to extreme temperature changes, such as the shift from fall to winter or winter to spring, as a primary driver of pipe failures, because thermal stress wears on the material.
Thawing is its own risk. Portland, Oregon’s water bureau warns that frozen pipes are more likely to burst as temperatures begin to thaw. A pipe that looked fine while frozen can start gushing hours after the weather warms. In Maine, where a January cold snap can be followed by a 40-degree afternoon, that is worth remembering.
What burst pipe repair costs
Costs vary widely because the pipe’s location matters as much as the break itself. Angi’s burst pipe cost guide puts the national average near $500, with most homeowners spending between $200 and $3,000. Complex or underground repairs can climb toward $5,000. Labor is about 80% of the total, with plumber rates from $45 to $200 an hour, and emergency call fees can add $100 to $300.
| Factor | Why it changes the price |
|---|---|
| Pipe location | Exposed basement pipes are cheap to reach. Pipes behind finished walls or under a slab are not. |
| Pipe material | Copper, PEX, PVC, galvanized steel and cast iron each take different tools and skills. |
| Timing | Nights, weekends and holidays usually add an emergency fee. |
| Damage downstream | Water extraction, drying, drywall and flooring are often separate from the pipe repair. |
| Depth | Buried lines add excavation, utility marking and restoration. |
The pipe repair is often the smaller bill. The cleanup, drying and finishing can exceed it. If drywall is involved, a guide to what drywall repair costs will help you budget for that part separately.
How long does a burst pipe repair take?
A simple accessible repair can take a few hours. Buried lines take longer. The City of Fort Worth’s water department says a typical water main repair takes about six hours, and that locating and marking other buried utilities such as gas or telecom lines can take two hours or more before digging starts.
That last point applies to your yard too. Before anyone excavates a broken line on your property, someone has to know what else is down there. It is one reason trenchless methods, which work through small access points, can save so much time.
Is it a supply line or a sewer line?
This is the question that decides who you call.
Supply line break (pressurized water in):
- Sudden loss of water pressure or no water at all
- Visible spraying, dripping ceilings, wet walls
- A water meter that keeps spinning with every fixture off
- A sudden spike in your water bill
Call a licensed plumber. We do not repair interior supply plumbing.
Sewer or drain line break (wastewater out):
- Slow drains in several fixtures, or gurgling toilets
- Sewage backing up in a basement floor drain
- A sewer gas smell indoors or near the yard
- A strip of unusually green, lush grass over the line, since leaking wastewater acts as an effective fertilizer
- Sinkholes or soft, sunken ground
If this list sounds familiar, the issue is likely a cracked, collapsed or root-invaded lateral. That is where we come in. Our guide to sewer gas smells in Maine homes explains what to check first.
When the burst pipe is underground
Traditional repair means digging a trench along the pipe, which means a ruined lawn, a torn-up driveway or a cut through a walkway. Trenchless repair avoids most of that. The EPA’s fact sheet on trenchless sewer rehabilitation describes the contrast: traditional replacement requires digging along the entire length of the existing line, while trenchless methods rehabilitate the pipe from inside.
How CIPP lining works
Cured-in-place pipe lining inserts a resin-saturated liner into the damaged host pipe. The liner is cured so that it hardens into a tight-fitting new pipe inside the old one. It seals cracks, joints and holes, and it keeps roots out. If you want the full walk-through, see our pipe lining process article or our homeowner’s guide to what cured-in-place pipe is.
A typical sequence looks like this:
- Camera inspection to locate the break and confirm the pipe can be lined.
- Cleaning, usually hydro jetting, to remove roots, scale and debris.
- Liner insertion through an existing cleanout or a small access point.
- Curing to harden the liner.
- Final camera check to confirm the result.
That last step is not optional in our view. An EPA quality assurance review for sewer and water main rehabilitation stresses post-installation CCTV inspection to verify that the liner fits tightly, that lateral connections are clear and that there are no wrinkles or dry spots. Ask any contractor for that footage before you pay. We have a page for it: what proof to demand before approving CIPP lining.
When lining is not the answer
Lining needs a pipe that is still a pipe. A line that has fully collapsed, shifted out of alignment, or has a severe belly holding water may need a different approach, such as a partial dig or replacement. A camera inspection tells you which. We would rather say so after the scope than sell a liner that will not hold.
Trenchless repair costs in Maine
Our published ranges, one-off per job, are:
| Service | Price |
|---|---|
| Sewer scope inspection | $150–$300 |
| Drain clearing | $150–$350 |
| Hydro jetting | $250–$600 |
| Trenchless pipe lining (CIPP) | $3,500–$8,000 |
The final number depends on the length and diameter of the line, its condition and how accessible it is. The scope comes first because it turns a guess into a quote. Compare this with an open-trench replacement, which adds landscaping, hardscape and restoration costs on top of the pipe itself.
Our perspective: what we see after the water stops
Most of the burst and broken lines we are called to are not dramatic. They are slow failures in older clay, cast iron or Orangeburg lines, where a crack lets roots in, the roots snag paper, and a backup is the first sign anyone gets. The homeowner learns about it on the worst day.
Our view is simple: look before you dig. A camera tells you whether you have a belly, a root mass, a cracked joint or a full collapse, and each one has a different fix. We record video so you see what we see, and you are not asked to take our word for it.
We also believe a repair should disturb as little of your property as possible. Mature trees, stone walls, a finished driveway and a new patio all make excavation more expensive and more painful. When the pipe allows it, lining through an existing access point is faster and gentler, and we back lining with warranties of up to 50 years. You can look up your warranty any time.
And we tell people when their problem is not ours. If water is coming out of a wall, call a plumber first. If sewage is coming up your floor drain, call us.
— John
Insurance: what to say and what to save
Wording matters when you file. The Minnesota Department of Commerce advises in its tips for frozen and burst pipe claims that standard homeowners policies generally treat water damage from a burst pipe differently from flood damage, and flood is often excluded. Describe the event as a burst pipe, not a flood. Photograph the scene before cleanup and keep damaged items until the adjuster has seen them.
In Maine, one local agency explains that burst or frozen pipes are typically covered when the home is properly heated, while gradual leaks and maintenance failures often are not. Coverage for sewer backup is frequently a separate endorsement, so read your policy or ask your agent before you need it. Your policy language controls, not a general guide.
Keep this file together:
- Timestamped photos and video of the damage
- Receipts for emergency work and water removal
- The plumber’s or contractor’s written report
- Our camera footage, if the cause was a sewer line, since it documents the cause of loss
If the damage is severe enough that you are considering selling instead of repairing, take the claim and repair decisions first and get professional advice before any sale.
Preventing the next burst
A few habits pay for themselves:
- Know your main valve and test that it turns before an emergency.
- Insulate pipes in unheated spaces such as crawlspaces, garages and exterior walls.
- Let faucets drip during a hard freeze on exposed lines.
- Keep the heat on when you travel in winter.
- Scope your sewer line if your home is older, you have large trees nearby, or you are buying. See our page on sewer scope inspections before buying a home in Maine.
- Schedule jetting if roots or grease keep returning.
Small leaks are the early warning. Seattle’s guidance and NYC’s leak detection reasoning agree on one thing: finding a small leak is cheaper than repairing a burst.
Need a sewer line looked at?
If you are in Maine and your problem is below the lawn or slab, start with a sewer scope inspection. It is the cheapest way to know what you have. If the camera shows a failing pipe, we can quote trenchless pipe lining, often finishing within a day. Roots and buildup can be cleared first with hydro jetting. Get a free quote from Trenchless Maine and check whether we cover your town.
FAQ
What do you do when a pipe bursts?
Shut off the main water valve, and the water heater’s cold-water inlet if it is safe. Move belongings out of the way, photograph the damage, and call your insurer and a licensed plumber. If you cannot find the valve, call your water utility.
How much does it cost to have a burst pipe fixed?
Most repairs run from $200 to $3,000, with a national average around $500, according to Angi. Underground or complex jobs can cost more, and emergency fees may add $100 to $300. Water damage cleanup is usually billed on top.
How long does a burst pipe repair take?
An accessible indoor pipe may take a few hours. Buried lines take longer, because utility locating alone can take two hours or more. Trenchless lining of a sewer line is often completed in a day.
Can a burst sewer line be fixed without digging up my yard?
Often, yes. If the pipe has not collapsed, CIPP lining can seal it from the inside through an existing access point. A camera inspection confirms whether your line is a candidate.
Sources
- Seattle Public Utilities: Frozen pipes in winter weather
- Mass.gov: Quick reference, water damage response in buildings
- NYC Department of Environmental Protection press release
- Portland Water Bureau: What to do if water pipes freeze, leak or burst
- Angi: How much does burst pipe repair cost?
- City of Fort Worth: Water main breaks
- EPA: Trenchless sewer rehabilitation fact sheet
- EPA: QA/QC practices for rehabilitation of sewer and water mains
- Minnesota Department of Commerce: Insurance tips for frozen and broken pipes
- Sevigney & Lyons: Water damage coverage in Maine